Fuel Pump Relay BypassGive your fuel pump extra voltageby John Moore Before this mod I measured 8 volts at idle and only 10.8 at WOT using the FP test terminal. After the mod it went to 12 volts at idle and 11.75 at WOT. Where to find the relay • Using a short jumper wire with flat blade connectors crimped on each end, connect the following two terminals on the plug: • Use electrical tape to cover all the other terminals and to hold in your blade connectors. • An alternate, more permanant solution would be to cut those two wires from the plug and connect them with crimp connectors or solder. |